TIP:
A HELPER IS REQUIRED FOR THIS
PHASE.
FAILURE TO INSERT SLIDE BED PROPERLY MAY RESULT IN
INJURY OR AMPUTATION. EXPOSED SLIDE EDGES CAN BE SHARP AND BECOME
A LACERATION HAZARD IF THE SLIDE IS NOT PROPERLY ASSEMBLED.
SLIDE RAIL 8' GREEN RIGHT
(x1)
A100054
CENTER SLIDE BRACE - W100545
5/8"x3 3/8"x17 1/4" (16x86x438)
M78
(x2)
SLIDE RAIL 8' GREEN LEFT
(x1)
A100055
NOTE:
PLACE THE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE
CHANNEL ON THE INSIDE OF THE RAIL. HOLD THE SLIDE BED IN PLACE WHILE A HELPER BENDS THE SLIDE
BED INO THE CHANNEL. MAKE SURE THE SLIDE BED IS COMPLETELY INSERTED INTO THE CHANNEL.
INSERT THE TWO CENTER SLIDE BRACES INTO THEIR RESPECTIVE LOCATIONS. SECURE THE SLIDE BED
AND CENTER USING THE PROVIDED HARDWARE.
USING A 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD
BE 12 INDENTIONS ON EACH RAIL.
REPEAT THIS PROCESS FOR THE OPPOSITE SLIDE RAIL.
054
(x1)
SLIDE RAIL 8' GREEN RIGHT
M78
(x2)
CENTER SLIDE BRACE
055
(x1)
SLIDE RAIL 8' GREEN LEFT
090
(x24)
SCREW - 2 1/2"
STEP 2 - SLIDE ASSEMBLY
QTY
PART
NUMBER
DESCRIPTION
24
H100090
SCREW PFH 8x2 1/2
25