background image

About Our Wood

Backyard Discovery uses 100% Cedar (C. Lanceolata) wood. Although we take great care in 
selecting the best quality lumber available, wood is still a product of nature and susceptible 
to weathering which can change the appearance of your set.

Your  Backyard  Discovery  structure  is  designed  and  constructed  of  quality 
materials.  As with all outdoor products it will weather and wear.  To maximize 
the enjoyment, safety and life of your structure it is important that you properly 
maintain it.

What causes weathering? Does it aff ect 
the strength of my product?

One of the main reasons for weathering is the 

eff ects of water (moisture); the moisture content 

of the wood at the surface is diff erent than the 

interior of the wood. As the climate changes, 

moisture moves in or out of the wood, causing 

tension which can result in checking and or 

warping. You can expect the following due to 

weathering. These changes will not aff ect the 

strength of the product:

1. Checking

 is surface cracks in the wood along

the grain. A post (4” x 4”) will experience more 

checking than a board (1” x 4”) because the surface 

and interior moisture content will vary more widely 

than in thinner wood.

2. Warping

 results from any distortion (twisting,

cupping) from the original plane of the board and 

often happens from rapid wetting and drying of 

the wood.

3. Fading 

happens as a natural change in the

wood color as it is exposed to sun-light and will 

turn grey over time.

How can I reduce the amount of 
weathering to wood product?

1.

Your wood product is coated with a

water-based stain

.

 Sunlight will break down 

the coating, so we recommend applying 

a water repellent or stain on a yearly basis 

(see your local stain and paint supplier for a 

recommended product). You must apply some 

type of protection (sealant) to the wood of your 

product. 

Please note this is a requirement 

of your warranty

Most weathering is just 

the normal result of nature and will not aff ect 

safety. However if you are concerned that a part 

has experienced a severe weathering problem 

please call our customer service department for 

further assistance. 

2.

Inspect wood parts monthly.  The grain of

the wood sometimes will lift in the dry season 

causing splinters to appear.  Light sanding may 

be necessary to maintain a safe environment.  

Treating your Product with protection (sealant) 

after sanding will help prevent severe checking/

splitting and other weather damage.

Instructions for Proper Maintenance

Owner’s Manual

5

Содержание 10x10 ABILENE PERGOLA





























Отзывы: