Backyard Discovery 100QT, Руководство пользователя и инструкции по сборке, Страница: 10 / 30

Owner's Manual Basic Setup Dimensions & Assembly Notes
3'-1 1/4"
[945 mm]
2'-8 1/2"
[826 mm]
1'-7"
[483 mm]
1'-10 7/8"
[582 mm]
2'-10 1/
4"
[8
68
mm
]
Important Assembly Notes
1) While assembling unit, take time before and after each step to make sure unit is level. If unit is
not level, assembly will be difficult and improper assembly may result. Extra care must be taken to
ensure the unit is square.
2) Pay close attention to the ITEMS NEEDED FOR EACH STEP. They can be a valuable aid when
sorting your wood and hardware. Assembly will be made easier if items are sorted by phase.
3) Pay close attention to make sure you are using the correct hardware in the correct step. Using
incorrect hardware may result in improper assembly.
4) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer.
Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut.
DO NOT over tighten.
5) Read each step thoroughly. The written steps may include important information not
shown in the illustrations.
1'-1 7/8"
[352 mm]
APPROX.
2'-5 5/8"
[752 mm]
APPROX.
2'-11 3/8"
[900 mm]
10