ASSEMBLY INSTRUCTIONS
STEP ONE: INSERT LEG TUBE (B) INTO GLASS TOP (A).
Make sure to place the table upside down on a non–
abrasive surface to avoid scratches
Securely affix (insert) table legs (Part B) into the glass
top with rim (Part A)
STEP TWO: SECURE CENTER CONNECTOR (C) TO MIDDLE OF THE
LEG TUBE (B)
Affix Center Connector (Part C) to table legs (Part B) by
using the Screw (Part D), Washer (Part E), and Screw Cap
(Part F)
Make sure all parts are firmly connected
STEP THREE: WITH ASSISTANCE, TURN THE TABLE UPRIGHT
Now your table is ready for use!
BACKYARD CREATIONS® MANUFACTURER‘S WARRANTY (Limited 1-Year Warranty)
This product is covered under the manufacturer’s one year limited warranty against defects in workmanship and materials. If your
product fails structurally during normal use within one year of purchase, the manufacturer will repair or replace the defective unit at no
charge. The warranty excludes furniture used for commercial purposes, furniture damaged by act of nature, abuse or lack of proper
care or corrosion or rusting of metal frame and hardware. Proof of purchase (dated register receipt) and in some cases photos of the
product are required for warranty claims. Maintain your outdoor furniture by using furniture covers and store away during extreme
weather conditions.
SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.
Test Rite Products Corp. 1900 S. Burgundy Place, Ontario, CA 91761 Made in China
