Backbone Dyback03 DB03, Инструкция по сборке, Страница: 17 / 19

䱾ⵖ〵铞僈剅
Controller Manual
ƵƩŽŶĚĞƐĐƌŝƉƟŽŶ
z
hƉΘŽǁŶƵƩŽŶ
Ɲ˥
ˏ
˦˚˥
ˑ
˦
z
^ĞƫŶŐƵƩŽŶ
Ɲ˥6˦
z
^ƚŽƌĞĚWŽƐŝƟŽŶƵƩŽŶƐ
Ɲ˥
1
˦˚˥
2
˦˚˥
3
˦
ĞĨĂƵůƚƐĞƫŶŐ
z
tŚĞŶƚŚĞĐŽŶƚƌŽůďŽdžŝƐƵƐĞĚĨŽƌƚŚĞĮƌƐƚƟŵĞŽƌƚŚĞƐƚĂŶĚŝŶŐƚĂďůĞŝƐƵŶďĂůĂŶĐĞĚ͕
ŽƌƚŚĞĚŝƐƉůĂLJŚĞŝŐŚƚŽĨƚŚĞŵĂŶƵĂůĐŽŶƚƌŽůůĞƌŝƐŝŶĐŽƌƌĞĐƚ͕ŝƚŶĞĞĚƐƚŽďĞƌĞƐĞƚ͘
WƌĞƐƐĂŶĚŚŽůĚƚŚĞƵƉŬĞLJĂŶĚĚŽǁŶŬĞLJĨŽƌϱƐĞĐŽŶĚƐĂƚƚŚĞƐĂŵĞƟŵĞ͕
ƵŶƟůƚŚĞƐƚĂŶĚŝŶŐƚĂďůĞƐƚŽƉƐƌƵŶŶŝŶŐ;ƚŚĞďƵnjnjĞƌƐŽƵŶĚƐͿ͕
ƌĞůĞĂƐĞƚŚĞŬĞLJ͕ĂŶĚƚŚĞƌĞƐĞƚŝƐĐŽŵƉůĞƚĞĚ͘
^ĞƚƚŚĞŵĞŵŽƌLJŵŽĚĞ
z
KƉĞƌĂƟŽŶŵĞƚŚŽĚ
z
z
z
Long press the up button 「▲」 , the standing table will rise. Release the button, the
standing table will stop rising.
Long press the down key
「▼」
, the standing table will descend. Release the key, the
standing table will stop descending.
When the motor stops running for 30 seconds, the LED display will automatically go out
and enter the standby mode. You can wake up by pressing any key (except s key).
when the standing table runs to the required height, press the set key (s key), and
VJGFKURNC[YKNNŕCUJHQTPUGEQPFURTGUUQPGQHVJGOGOQT[MG[UVQ
remember the current height of the lift table. The other two memory keys operate
by the same way. The keys 1, 2 and 3 on the manual controller represent that the
OCPWCNEQPVTQNNGTECPOGOQTK\GVJTGGFKőGTGPVJGKIJVUCPFECPOGOQTK\GVJGO
repeatedly. After power failure, the memorized height is still saved. Press the
memory key, the standing table will automatically run to the height to be memo-
rized. Press any key during the operation to stop.