Ribcage Installation: Part 2 - Assembly
www.back-bone.ca | [email protected]
5
Section 1: Disassembly
1-1 Remove Tripod Mount and Accessories
Let’s start by removing the optional parts from your camera. Remove the battery and memory card.
Next use your own tools or the larger of the two L-keys that came with your kit or camera to remove the
screws holding on the tripod mount. (0.050” Hex)
Remove the 5mm C-Mount spacer ring. Use your small L-Key (0.035” Hex) to loosen the set screw on the
large CS-Mount ring. Unscrew the ring to loosen. Turn the camera so that the front is facing the floor.
Continue to unscrew the ring until it comes free. The IR-cut filter should drop into the CS-ring and plastic
holder. Set the rings aside.
