– Page 1 of 3 –
F3-A DIESEL LOCOMOTIVE INSTRUCTIONS
Thank you for purchasing a Williams by Bachmann
®
locomotive. This locomotive has been manufactured to provide
years of use and enjoyment. Please follow the simple instructions below.
This locomotive has been greased and tested before leaving the factory. Before operating, please lightly lubricate the
points shown in the diagram below. Do not over-lubricate and take extra care to avoid getting lubricants on the wheel
surfaces or traction tires.
1.
For the axles and coupler pivot points
Marked A
, we recommend that you lubricate with a small amount of light
oil such as Bachmann E-Z Lube
®
#99984 Light Gear Oil.
Do not over-lubricate
.
2.
For areas that require electrical flow, such as roller pick-ups
Marked B
, please use Bachmann E-Z Lube
®
#99981
Conductive Contact Lube.
Never use any Teflon® based oil on these areas because this type oil has insulating
properties.
3.
For the gears
Marked C
we recommend that you lubricate with a small amount of heavy gear oil such as
Bachmann E-Z Lube
®
#99983 Heavy Gear Oil.
Do not over-lubricate
.
