Dimensions of CONI-built in frame
CONI-built in frame, general dimensions
Corner radius: ……….……………………….. 5mm
Built in depth: ……………………… approx. 56mm
Table thickness: ……………………... up to 16mm
CONI-built in frame, 3-way (short)
Built in dimensions (L x W): ….. ca. 239 x 139mm
Outside dimensions (L x W): … ca. 248 x 151mm
CONI-built in frame, 4-way
Built in dimensions (L x W): ….. ca. 281 x 139mm
Outside dimensions (L x W): … ca. 291 x 151mm
CONI-built in frame, 5-way
Built in dimensions (L x W): ….. ca. 323 x 139mm
Outside dimensions (L x W): … ca. 333 x 151mm
CONI-built in frame, 6-way (long)
Built in dimensions (L x W): ...…ca. 377 x 139mm
Outside dimensions (L x W): … ca. 387 x 151mm
The CONI-built in frame is inserted in the table
cutout and fixed from downwards to the desk top
with 4 clamping jaws. The clamping jaws are fixed in
the framework. You can tighten the screws using a
standard screwdriver. The clamping jaws insure the
firm assembly in the desk, without hurting table. To
take the built-in frame out, just screw the screws in
the clamping jaws out.
Fit in the CONI-power strip
CONI-power strip, 3-way (short)
Dimensions (L x W x H): ……… 217 x 52 x 44mm
CONI-power strip, 4-way
Dimensions (L x W x H): …… 259,5 x 52 x 44mm
CONI-power strip, 5-way
Dimensions (L x W x H): ………302 x 52 x 44mm
CONI-power strip, 6-way (long)
Dimensions (L x W x H): ………356 x 52 x 44mm
The CONI-built in frame can be equipped with
different possible power strips, individually provided,
very fast and without tools. The power strips are
unlocked by pressing of the noses of the endcaps
and then pulling it easily forward. To insert the
power strip in the CONI-built in frame, push it please
until snaps in.
Brush strip of the CONI-built in frame
Trough the high-quality brush strip the cables can
be put also the CONI-built in frame is closed.
The brush strip can be replaced if necessary at any
time. Contact us for details if necessary.
Built-in examples of CONFERENCE
Operating instructions CONI DE-EN_Rev. 03 Page 2 of 2
Technical changes, errors and other mistakes might be possible in this documents.
Bachmann GmbH & Co. KG D-70565 Stuttgart / Germany
www.bachmann.com Mat.-Nr. 09.390
OPERATING INSTRUCTIONS
CONI – INTEGRATED FUNCTIONALITY
Dear customer,
thank you for buying our CONI-built in solution for desks, trainingcentres or conference tables.
You have decided for a product with a lot of equipment variants. Use your investment for a long
time, even if the requirement of the configuration in the power strip change. The singular change
principle of the power strip makes the simple exchange for you possible by additionally available
CONI-power strips. We would like to present you herewith the simple assembly steps.
Your Bachmann GmbH & CO. Kg
