Bacharach IEQ Chek Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 40

Bacharach IEQ Chek Скачать руководство пользователя страница 25

IEQ Chek



Operation Manual

1509-9001 Rev 1

17

NONE

SETUP

KOREA

MOM HOME

CONF RM5

<EMPTY>

MEM CARD:

This menu item provides the user with information about the flash card

and a function to format a new card. The selections are:

INFO:

This menu function indicates the size of the flash card memory

and the number of CSV files stored, if any.

FORMAT:

This menu function is used to format a flash card. Any flash

card provided by the factory has already been formatted. This

format function is used to format new flash cards, erase flash

cards, and reset flash cards if the memory is corrupt.

NOTE:

If using a PC to format a flash card, be sure to select

“FAT-32” as the file system format.

5.4. Alarm Menu

This menu item allows the user to set up alarm set points that activate the audible

alarm. The menu choices are:

ALARM

SET ALARM

ALARM:

The menu choices at this point are:

OFF

ALL

NEXT…

CO

CO2

NOTE:

Only installed sensors show in this menu, e.g., CO, CO

2

, etc. This menu

will only display temperature and RH sensors if an alarm point has been set for

them. Go to “SET ALARM” to reference setting alarm set points.

OFF

:

This menu item removes all asterisks in front of all sensors listed

(installed) indicating they have been de-selected and will not be

included in the alarm set list. Press the MENU button at this menu

item and the LCD indicates

ALARM SET UP HAS BEEN SAVED

.

The display then goes back to the alarm menu screen.

ALL

:

This menu item puts an asterisk in front of all sensors listed

(installed) indicating they have been selected to have an alarm set

point. Press the MENU button at this menu item and the LCD

indicates

ALARM SET UP HAS BEEN SAVED

. The display then

goes back to the alarm menu screen.

«
...
23
24
25
26
27
...
»

Содержание IEQ Chek









































Отзывы:

Нет отзывов