background image

WARRANTY

Bacharach, Inc. warrants to Buyer that at the time of delivery this Product will be free from defects in mater ial 
and manufac ture and will conform substan tially to Bach arach Inc.’s ap plicable spec i fi  ca tions. Bacharach’s 
li a bil i ty and Buyer’s remedy under this warranty are lim it ed to the repair or replacement, at Ba charach’s option, 
of this Product or parts thereof returned to Seller at the factory of manufac ture and shown to Bacharach Inc.’s 
reasonable satisfaction to have been defective; provided that written notice of the defect shall have been given 
by Buyer to Bacharach Inc. within two (2) years after the date of delivery of this Product by Bacharach, Inc.

Bacharach, Inc. warrants to Buyer that it will convey good title to this Product.  Bacharach’s liability and Buyer’s 
remedy under this warranty of title are limited to the removal of any title defects or, at the election of Bacha rach, 
to the replacement of this Product or parts thereof that are defective in title.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE GIVEN AND ACCEPTED IN LIEU OF (I) ANY 
AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, IN CLUD ING WITH OUT LIMITATION THE IM-
PLIED WARRANTIES OF MERCHAN TABILITY AND FITNESS FOR A PARTICULAR PURPOSE: AND (II) ANY 
OBLIGA TION, LIABILITY, RIGHT, CLAIM OR REM E DY IN CON TRACT OR TORT, WHETHER OR NOT ARIS-
ING FROM BACH A RACH’S NEGLIGENCE, ACTUAL OR IM PLIED. The remedies of the Buyer shall be limited 
to those provided herein to the exclusion of any and all other remedies includ ing, without limita tion incidental or 
consequen tial dam ag es.  No agree ment varying or ex tend ing the foregoing warranties, remedies or this limita-
tion will be binding upon Bacharach, Inc. unless in writing, signed by a duly au tho rized offi cer of Bacharach.

A

Instruction 24-9435

Register Your Warranty by Visiting 

www.mybacharach.com

Notice:

Product improvements and enhancements are continuous, therefore the spec i fi  ca tions and in for ma tion con-
tained in this document may change without notice. 

Bacharach, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in con-
nection with the furnishing, performance, or use of this material.

No part of this document may be photocopied, reproduced, or translated to another language without the prior 
written consent of Bacharach, Inc.

Copyright © 2010, Bacharach, Inc., all rights reserved.
BACHARACH and Fyrite are registered trademarks of Bacharach, Inc. All other trademarks,
trade names, service marks and logos referenced herein belong to their respective companies.

Declaration of Conformity

Manufacturer’s name: 

Bacharach, Inc.

Manufacturer’ address: 

621 Hunt Valley Circle

 

New Kensington, PA 15068

Product name: 

Fyrite Tech

 

conforms to the following specifi cations:

 

European Directive 89/336/EEC

 

EN50082-1: 1997 (Electrostatic Discharge)

 

EN50082-1: 1997 (Immunity)

 

EN55022; Group 1, Class B (Emmission)

Содержание Fyrite Tech 50

















































Отзывы: