Refrigerant Recovery Unit
6
2020-9000 Rev 0
1.4. Safety (Proper Operations)
WARNING!
Only cylinders rated at 400 psi or greater and certified for
R410A should be used to recover R410A. Failure to use the proper
cylinder can be extremely dangerous.
USE RECOMMENDED ACCESSORIES!
Follow the instructions that
accompany all accessories. Improper use of accessories may damage
the equipment or create a hazard.
USE WEIGHT (CHARGING) SCALE!
When the ECO-2020 does not have
the 80% Shut-Off Kit option installed, a scale (P/N 2010-0000 or similar)
must be used to indicate when the recovery tank is 80% full (to prevent
overfilling).
WARNING!
The input pressure of the ECO-2020 must not exceed 26
bars (337 psi).
WARNING!
The ECO-2020 must be positioned upright on a level
surface, otherwise vibration, noise, and/or abrasion may occur.
WARNING!
Do not block the ventilation openings of the ECO-2020.
WARNING!
If the internal circuit breaker trips, wait at least 5 minutes
before resetting.
REPAIR DAMAGED PARTS!
Do not operate the unit with a defective
part. Repair unit to proper operating conditions.
WARNING!
Unplug unit before servicing; otherwise, an electrical shock
hazard will be present when the unit is disassembled.
IMPORTANT!
Periodically check the filter screen (located inside the
brass fitting of the inlet port) before using and clean if necessary.
www.
.com
1.800.561.8187
