Instruction 24-9450
2
Description
IrDA Printer
Power Switch
The Power switch, located on the left side of the printer, is used to turn the
unit ON and OFF .
Indicator LEDs
• Power LED (Green):
Glows steady when the printer is turned ON .
• Error LED (Red):
Flashes once-per-second when the printer is out of
paper; the buffer is full; or when the print head temperature exceeds
140°F (60°C) . This LED will also flash
one time
when the printer is
placed into its set-up mode (refer to Section
Set-Up Mode
) .
Pushbuttons
• FEED:
- Momentarily press this button to advance the paper . Press and hold
down to feed paper continuously .
- This button in conjunction with the ON/OFF switch is used to start
the printer’s self test function (refer to Section
Self Test
) .
- When the printer is in its set-up mode, this button is used to modify
the selected printer parameter (refer to Section
Set-Up Mode
) .
• SEL:
- Used in conjunction with the ON/OFF switch to place the printer into
its set-up mode (refer to Section
Set-Up Mode
) .
- With the printer in its set-up mode, use this button to select the de-
sired printer parameter .
Sensors
• Paper Out:
When the paper roll runs out, the printer is disabled to pre-
vent damage to the print head . This condition is indicated by the Error
LED flashing red.
• Infrared Sensor:
Located at the front of the printer, this sensor
receives the infrared output of an external instrument.
Содержание 24-1400
Страница 4: ...IrDA Printer Instruction 24 9450 ii Notes...
