Bacchus BCS1000, Руководство по установке

Страница: 1 / 8

1
Installation Manual BCS 1000/1500
Supplies Needed for Installation
1. Double insulated refrigerant line set.
2. 1/4” copper water supply
3. 1/4” condensate vinyl drain tube/tube clamps
4. Provide 120V 15A circuit for indoor evaporator, and 120V/230V 30A, single or three
phase (dependent upon your condensing unit) for outdoor condensing unit.
Check local codes.
5. 18-2 stat wire; to be used to extend temperature sensor, humidity sensor cable,
keyboard.
6. Condensing unit pad
Condensing Unit Set Up
1. Place a (suggested model) on a firm level location (pad) for outdoor applications, or
add 4 anti-vibration pads to each corner of the condensing unit for indoor use. Place
in an area with adequate air flow.
2. Braze in suction and liquid lines to condensing unit.