BACA SYSTEMS BOSS, Руководство пользователя

Страница: 14 / 38

BOSS Saw User Manual V1.0
5/9/2019
14
7. First Cut= Yes
8. If you want additional cuts at different widths
a. ADD
b. Input new piece number and piece width
c. Repeat as needed
9. Menu
10.
See Send Program for further instructions
Cross Cuts
1. Select Cross Cut
2. You must position the head exactly where you want it to start cutting
a. The blade edge and blade center must be inside the define box and/or material
b. You do not have to change the orientation of the head
i. But the blade must point in the direction you want the first type of cuts
3. There are 3 ways to set the cutting limits
a. 2 point (precise)
i. Start
ii. Move the head where you want the cut to end
iii. End
b. Length
i. Length
ii. Type desired length in Length box
iii. Press Enter
c. Through
i. If slab is defined, it will apply the cut all the way through the slab
4. In either case, a cut should appear. If you get any kind of alarm, something is not satisfied.
5. Pieces number= Number of pieces you want at that size
6. Piece Width= How wide do you want that piece
a. the cuts should update as you change the information
7. First Cut= Yes
8. If you want additional cuts at different widths
a. ADD
b. Input new piece number and piece width
c. Repeat as needed
9. Switch
a. Now you can apply cuts from a perpendicular direction
10. Steps 3-8 work the same way here
11. Menu