BAC TY-PH12, Руководство пользователя

Страница: 11 / 11

2018
ROBERT’S RULES FOR TOWING
1. INSPECTION
Prior to hooking up the Towbar to the tug, make a quick visual inspection of the Towbar.
Check for a bent or damaged frame and for worn or missing parts. Check tire pressure. Check
that you have the proper head installed. DO NOT attempt to tow any aircraft with a damaged or
improper Towbar.
2. RESPONSIBILITY
Operator of the tug must understand that it is his/her responsibility to move the aircraft safely
from “Point A” to “Point B”. NO HOT RODDERS.
3. HOOK UP
When hooking the Towbar to the tug, three things are necessary:
1. The proper tug and Towbar for the size aircraft being moved.
2. The Towbar must be approximately level between the aircraft and the tug.
3. The hitch on the Towbar must move freely on the hitch mounted on the tug.
BASIC TOWING RULES
1.
Prior to moving, make sure that full swivel release pins are released (if applicable). Also,
double check that all the tie downs and chocks are removed, and aircraft brakes are released.
2. TOW SLOW, max speed, a brisk walk.
3. NOSE WHEEL TOWING LIMITS: Do not exceed towing limits. If not marked or not known,
do not exceed 30° from center. Be extra cautious on snow and ice.
4. To prevent hangar rash when squeezing the birds together an extra set of eyes helps.
5. Push at a creep to minimize chance of jack-knife” Think Safety” and use common sense.
NOTE: Thousand of dollars in damage can occur in a few seconds while towing. It is estimated that
90% of towing damage is due to operator negligence. We all know when it’s raining or -10°
below zero and you’re on an open tug it’s tough to go at a walking speed.
Thanks for reading the rules.
Roy Brackett, Brackett Aircraft Co., Inc.
Page 11 of 11