BABYTREND EZ-Lift 35 PLUS, Руководство пользователя

Страница: 16 / 34

29 30
5.0
FEATURES
5.0
FEATURES
5.11 Adjustment of the Shoulder Straps
Safety Seat
This Safety Seat features four height
adjustments for the harness shoulder
straps.
The harness straps must be used
in the slots that position the straps to
be even with or just below your child’s
shoulders (Fig. 28-1). The harness
straps are adjusted as follows:
1. Remove the Safety Seat from the
Base and rotate the Carry Handle to
the back position. Place your child in
the Safety Seat such that your child’s
bottom is all the way to the rear and
bottom of the seat.
2. Determine which pair of slots will
position the harness straps even with
or just below your child’s shoulders.
DO NOT use harness slots that will
position the harness straps above
your child’s shoulders as the harness
straps in this position will not restrain
a small child in a sharp turn, sudden
stop or crash.
Fig. 30-1
Proper height is even or
just below shoulder
Failure to properly adjust the harness on your
child increases the risk of death or serious injury
in the event of a sharp turn, sudden stop or
crash. Please follow the instructions very closely
to ensure that the harness is properly adjusted to
fit your child at all times. Your child will grow very
rapidly! Please check the fit of the harness every
time you use the Safety Seat.
WARNING
Pillow Insert
Body Insert
5.10 Inserts Use
• Use is not mandatory
• ONLY use inserts with
children who weigh
between 4-18 lbs.
• DO NOT use Pillow insert
use if child’s head is pushed
forward and falls down.
• NOT included in all models,
styles may vary.