BABYTREND ALLY-35 Скачать руководство пользователя страница 16

29

30

5.0 

Features

5.0 

Features

5.8  Adjustment of the Shoulder Straps

 

The Safety Seat features three height 

adjustments for the harness shoulder 

straps. 

The harness straps must be used 

in the slots that position the straps to 

be even with or just below your child’s 

shoulders

 (Fig. 29-1). The harness straps 

are adjusted as follows:

1.  Remove the Safety Seat from the Base 

and rotate the Carry Handle to the back 

position. Place your child in the Safety 

Seat such that your child’s bottom is all 

the way to the rear and bottom of the 

seat.   

2.  Determine which pair of slots will 

position the harness straps even with 

or just below your child’s shoulders. 

DO 

NOT

 use harness slots that will position 

the harness straps above your child’s 

shoulders as the harness straps in this 

position will  not restrain a small child in a 

sharp turn, sudden stop or crash.

3.  If the Harness Straps require 

adjustment, remove your child from the 

Safety Seat.  Rotate the handle to the 

upright carry position.  

Fig. 29-1

Fig. 29-2

4.  Loosen the harness straps by 

depressing the Harness Adjuster Button 

located below the flap just ahead of 

the Harness Buckle and pulling on the 

harness straps. 

5.  Turn the seat over. Locate the Belt 

Adjuster Plate near the bottom of the seat 

(Fig. 29-2). Remove both Harness Straps 

from the Belt Adjuster Plate. From the 

front of the seat, pull the Harness Straps 

through the shoulder area slots and seat 

pad. Never remove adjuster from Belt 

Adjuster Plate (Fig. 30-1).

6.  Using the included Belt Threading Tool, 

insert the Harness Straps through the Slots 

selected in step 2 above, in the seat pad 

and the seat shell, respectively  

(Fig. 30-2).

7.  From the rear of the Safety Seat, pull the 

Harness Straps through the Slots until 

you have enough strap to reach the Belt 

Adjuster Plate. 

8.  Reassemble the Harness Straps to the Belt 

Adjuster Plate. Do the left Harness Strap 

first, followed by the right Harness Strap. 

Check that Harness Straps are completely 

within the Belt Adjuster Plate loop  

(Fig. 30-3).  

Fig. 30-1

Fig. 30-2

Fig. 30-3

Содержание ALLY-35



































Отзывы: