BABYSTYLE Qyster 3, Инструкция по эксплуатации

Страница: 21 / 28

21
FITTING THE OYSTER CARAPACE
INFANT CAR SEAT USING THE MULTI
ADAPTORS (CONT)
43. Hold the car seat by the carry handle and
lower the car seat onto the multi adaptors, the
adaptors should slot into the cavity at the base of
the car seat handle left & right. Push down the car
seat firmly until the car seat clicks and locks into
position. Check that the car seat is secure and
locked by pulling up on the car seat handle.
WARNING: For car seats used in
conjunction with the chassis, these car seats
do not replace a cot or bed.
WARNING: Should your child need to sleep,
then they should be placed in a suitable
pram body, cot or bed.
REMOVING THE OYSTER CARAPACE
INFANT CAR SEAT FROM THE CHASSIS
WHEN FITTED WITH THE MULTI
ADAPTORS
44. To remove the car seat from the chassis: Press
down on the two buttons on the sides of the car
seat and lift the car seat away from the chassis
45. To remove the adaptors form the chassis push
in the buttons on the bottom of the adaptors and
lift the adaptors away from the attachment device.
43
44
45
ALIGN
AND
PUSH
DOWN
PRESS
DOWN
AND LIFT
PRESS
AND LIFT