Safety and Care Advice
Important
– Please read these instructions fully before starting assembly
1
.
Check you have all the
components and tools listed on
pages 2 and 3.
.
Remove all fittings from the
plastic bags and separate them
into their groups.
.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
.
Make sure you have enough
space to layout the parts before
starting.
.
Do not stand or put weight on
the product, this could cause
damage.
.
Assemble the item as close
to its final position (in the same
room) as possible.
.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
.
We do not
recommend the
use of power
drill/drivers
for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
.
Parts of the assembly will be
easier with 2 people.
.
Dispose of all packaging
carefully and responsibly.
This product contain
Natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
.
Care and maintenance
.
.
Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
.
From time to time check
that there are no loose
screws on this unit.
.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Note:
if required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Warning !
·
In cot mode, three base height positions are possible. The lowest position is the safest and should
always be used once the child can sit unaided.
·
The thickness of the mattress should be such that the distance between the top of the mattress and the
top of the sides should be no less than 500mm with the base in its lowest position and no less than
200mm with the base in its highest position (indicated by printed line on cot frame).
·
Do not leave anything (large toys etc.) in the cot which could provide a foothold or present a danger of
suffocation or strangulation.
·
The cot is suitable for a mattress of 1400mm in lenght and 700mm in width.
For safety reasons, the
minimum mattress size to be used in this cot must be 1380mm in length and 680mm in width.
·
Do not position too close to strong sources of heat e.g. open fires, electric fires or gas fires.
·
Regularly check the security of fittings and ensure there are no loose screws which could trap parts of
the body, or clothing (e.g. strings, necklaces or ribbons for dummies) which would pose a risk of
strangulation.
·
Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the
manufacturer
·
Do not use more than one mattress in the cot
·
The cot shall no longer be used when the child is able to climb out of the cot to prevent injury from falls
·
Designed and manufactured to BS EN 716 -1: 2008
IMPORTANT KEEP IT FOR FUTURE REFERENCE, READ IT CAREFULLY
.
