11
Page
H / 31mm x 2
Step 7
Refer
to magnifie
d
diagram; ensure
correct way
(outside/Inside) of
dropside.
"PUSH" LABEL FACE
OUTWARD.
Align and insert upper
glide pins into top
recess of dropside
panel, push end panels
outward for space.
It is best to have two
persons to do both
sides at same time.
OUTSIDE
INSIDE
H
H
5
G
H
Step 8
Rotate the bottom
edge
of dropside, carefully
align the lower recess
with the lower pins of
cot end, Push down
pins to pass through
and be inserted into the
lond grooved of the
plastic mechaniesm.
NOT UNDER SPRING - it
will lock the pins
without glide action.
FULL TIGHTEN ALL
BOLTS CONNECTION.
Maxingmum mattress height mark(210MM);
Top of mattress should be below this mark in all positions.
G
G
5
PUSH
G/ 32mm x 2
NON
OUTSIDE
G
