11
10
Fig.2
Fig.1
Fig.3
● The harness should be adjusted as tightly as
possible without causing discomfort to your
child.
● It is dangerous not to tighten the straps. Check
the adjuster and be sure that the straps are
pulled tightly, not twisted after installati
everytime.
6.4.The use of buckle
1.Put the two metal sections of the buckle connectors together (fig.1)
2.Slot the two buckle connectors into the slot in the top of the buckle
until hearing “click”(fig.2)
3.Check the harness is correctly locked by pulling the shoulder straps
upwards (fig.3).
4.To release the harness, press the red button on the buckle
downwards.
30
P
7.Care and Maintenance
7.1.Remove the fabric cover
Step 1:
First pull out the harness from the seat.
Step 2:
Undo the press button on the handle, then remove the canopy
from backwards.
Step 3:
Loosen the elastic, remove the fabric cover from upwards
● Follw the steps described above but in reverse order in order to
re-fasten the cover.
7.2 Cleaning of the fabric cover
Use only neutral detergent and warm water to wash the fabric
cover.Do not wash it by machine,spin-dry or tumble-dry are not
recommended.
THIS COVER SHOULD BE HAND WASH
7.3.Care and Maintenance
1.Please regularly check the function and spare parts of the baby car
seat are in good condition to provide the maxinum protectio
2.Before using, please check the locking fastness of the buckle by
pulling in effort the straps and see whether the buckle is loose or not.
3.Do not use the baby car seat in cold,wet or hot circumstance for a
long time
8.What to do after an acciden
Please change the seat without fail after an accident.
