This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
FCC statement: update version.
Warning:
Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
nOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
iC statement:
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
Using ThE a014618 WiFi kEy
(sOld sEparaTEly)
• Turn on the Zero Emission Camera and install the My Babycamera
app. Then insert the Wi-Fi key in the USB port
(8)
.
• Wait for about a minute for the network to appear in the list of available
Wi-Fi networks.
• Select the «Babymoov cam» network. Enter the password 12345678,
then click «Connect».
• You are now connected to the «Babymoov cam» network and can
start using the My Babycamera app.
n.B.:
This Wi-Fi key will ensure you can continue using your Zero
Emission Camera even when in places with no internet service.
In this case, operation will be in Wi-Fi and not PLC mode.
Also note that the notifications do not work when using the A014614
Wi-Fi key.
En
Instructions for use • Instrucciones de uso • Notice d’utilisation
WiFi key - Llave WiFi - Clé Wifi
Zero Emission Camera
Ref.: A014618
ALT Group Babymoov Corp.
715 Washington Street FL 3
HOBOKEN, NJ 07030
USA
www.babymoov.com
Designed and engineered
by Babymoov in France
1-855-517-2456
FCC ID: 2ACYNA014618
IC ID: 12292A-A014618
Images are provided for illustrative purpose - Fotos no contractuales – Images non contractuelles
A014618-Manual-Artwork-02
8
