11
TROUBLE SHOOTING GUIDE
Problem
Possible cause
Solution
No sound on the receiver
• The microphone’s sensitivity is too low.
• The receiver volume is too low.
• The power adapter is not properly connected.
• VOX mode active.
• The batteries are empty.
• Increase the microphone sensitivity.
• Increase the receiver volume.
• Check the connection.
• Press a button to activate the screen.
• Charge your receiver or replace the batteries
in the transmitter or plug the units into
the mains.
Transmission always on
• The VOX mode sensitivity is too high.
• VOX mode is not activated.
• Activate and/or adjust the VOX sensitivity
(19)
.
Audible alarm
permanently activated
• The receiver batteries are empty/dead.
• Distance between baby and parent unit exceeds
the operating range.
• Replace the batteries in the transmitter or plug
the transmitter into the mains.
• Move the baby & parent unit closer together.
Always showing low battery alert
• Battery has run down.
• The battery is damaged or empty.
• Recharge battery using AC adapter
(parent unit).
• Replace with new battery or use AC adapter
(baby unit).
• Replace with new battery pack.
Battery life is short
• Night light is permanently switched on.
• Vibration alert is switched on.
• Switch off night light or set to VOX operate.
• Switch off vibration alert.
Communication is frequently
interrupted or off
• The transmitter and/or receiver are located near
other electrical appliances.
• Using the babyphone on a power strip.
• The two appliances are separated by metal
structures, thick walls, floors, etc.
• Baby unit battery has run down.
• Move the transmitter and/or receiver away
from sources of interference or re-set
the pairing.
• Do not connect your baby monitors to
power strips.
• Re-locate baby or parent unit.
• Replace with new battery or use AC adapter.
BABY MONITOR PREMIUM CARE
•
Instruction manual
VOX
VOX
RECEIVER VOLUME
NIGHT LIGHT BRIGHTNESS ADJUSTMENT
NIGHT LIGHT VOX
SETTINGS
REPLY TO BABY
x1
5
x6
Содержание A014204
Страница 2: ...2 ...
