7
PROFESSIONAL
CORDLESS TRIMMER
FX59ZE
This heavy-duty trimmer features
zero gap stainless steel T-blades,
great for detailing, designs and
all other
fi
ne work. Very easy-to-
handle, it is also perfect for fading
beards, sideburns and the nec-
kline. A powerful DC motor and
lithium polymer batteries deliver
high performance for clean, close
cutting.
OPERATING INSTRUCTIONS
•
Before using the trimmer for
the
fi
rst time, charge conti-
nuously for 2 hours. Maximum
battery capacity will only be
reached after 3 charging and
discharging cycles.
• Make sure the switch on the trim-
mer is in the “0-OFF” position.
Connect the charging jack into
the receptacle on the buttom
of the trimmer. Plug the adapter
into any electrical outlet (at the
voltage listed on the label a
ffi
xed
to the adapter). The charging
indicator will light up to indicate
that the charging has begun.
Charging is complete after 1 hour.
User will see all 4 bars lit on the
trimmer handle when
fi
nished.
• The adapter may become warm
while charging. This is normal.
• Preserving the batteries: in order
to maintain the optimum capa-
city of the rechargeable batteries,
the trimmer should be recharged
for 2 hours approximately every 6
months.
• Turn the switch to “HI” for high-
speed function and “LO” for low-
speed function.
• Make sure the switch on the trim-
mer is in the “0-OFF” position
when the trimmer is not opera-
ting.
MAINTENANCE INSTRUCTIONS
VERY IMPORTANT:
Blades must
be cleaned and oiled on a regular
basis for proper functioning. Fai-
lure to regularly clean and oil the
blades will void the warranty.
Maintenance of the blades
• Remove hair trimmings and
debris from the blades using the
provided cleaning brush. Wipe
the housing clean with a dry cloth.
• Apply a few drops of lubricating
oil to the blades, and wipe o
ff
any
excess oil with a dry cloth. This
last procedure is important for
the proper maintenance of the
blades.
Always apply oil to the blades be-
fore and after use. This will ensure
maximum cutting performance.
Hold trimmer away from you in a
downward position and apply oil
on the front and sides of the cutter
ENGLISH
