BaBylissPro BRILLIANCE COBALT EDITION BAB6738U, Руководство пользователя

Страница: 3 / 8

if the appliance is switched off. For additional protection
the installation of a residual current device RCD) with a
rated residual operating current not exceeding 30mA is
advisable in the electrical circuit supplying the bathroom.
Ask your installer for advice.
WARNING! Do not use this appliance near water contained
in basins, bathtubs or other vessels.
• Do not use this appliance in the bathroom.
• Do not immerse the appliance into water or other
liquids.
• Never look directly into the barrel of the hairdryer when it
is switched on.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the
appliance has been dropped. In the event of damage,
contact the Conair Customer Care Line (refer to ‘UK After
Sales Service’ section for further information).
• Do not use the appliance if the lead is damaged. In the
event of damage, discontinue use immediately. Return
the appliance to the Conair Service Centre (refer to ‘UK
After Sales Service’ section for further information).
• Do not leave the appliance unattended when switched on or
plugged in.
• This unit is equipped with a safety thermostat. In the event
of overheating the appliance will either stop automatically
or run hot and cold intermittently. Should this happen,
switch the dryer to the ‘off’ or ‘0’ position, unplug and
allow to cool for 10 minutes. Before use, ensure the rear
filter is clear of hair and other debris. Plug in and switch
on. If the appliance continues to overheat discontinue
use immediately, switch off and unplug, and contact
the Conair Customer Care Line (refer to ‘UK After Sales
Service’ section for further information).
• Take care that the air vents do not become blocked when