BaBylissPro BAB787U, Руководство пользователя

Страница: 3 / 9

appliance has been dropped. In the event of damage,
discontinue use immediately and contact the Conair
Customer Care Line (refer to ‘UK After Sales Service’
section for further information).
• Do not use the appliance if the lead is damaged. In the
event of lead damage, discontinue use immediately.
If the lead is damaged it must be replaced by the
manufacturer. Return the appliance to the Customer
Care Centre (refer to ‘UK After Sales Service’ section
for further information). No repair must be attempted
by the customer.
• Only use the attachments supplied with this appliance.
• Only ever attempt to zero gap the blades using the
adjustment tool provided. Be sure the blades are
aligned properly . The teeth of the smaller blade (cutter)
should rest slightly below the upper edge of the larger
blade. Please follow the instructions given within this
information booklet precisely.
• Do not leave the appliance unattended when switched
on or plugged in.
• Do not place the appliance on any surface whilst in
operation.
• Before use, check that the voltage supply corresponds
to the voltage indicated on the appliance.
• Maximum continuous operating time is 20 minutes;
allow to cool for 10 minutes before proceeding.
• Special care is required when using the appliance close
to the ears, eyes, neck and face.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• Always switch off and unplug the appliance when
cleaning or when not in use.
• Allow appliance to cool before storing away.
• This appliance contains a lithium ion battery and must
be disposed of safely at the end of its life. Please take
to a recycling centre for safe disposal.
• This product complies fully with all appropriate EU
and UK Legislation and the Standards relevant to this
type and class of appliance. We are an ISO9001:2015
certified company that continually evaluates our
Quality Management System performance. If you have
any queries regarding product safety and compliance,
please contact our Customer Care Centre. (Refer to
‘UK After Sales Service’ section for further information).