• Never turn the trimmer off whilst in the nose and ear hair.
Waterproof
The trimmer, attachment heads and comb guides are 100% waterproof
and can be used in the shower and bath. Always ensure to clean and allow
the trimmer to dry after each use and before storing away. See ‘Cleaning
& Maintenance’ section.
CLEANING & MAINTENANCE
To maintain optimum performance, the appliance should be cleaned after
each use:
• Remove the comb guide after use. Rinse under running water and dry
thoroughly before storage or use.
• Remove the trimmer head after use. The heads are washable for easy
cleaning. Rinse under running water and dry thoroughly before storage
or use.
• Do not disassemble the blades.
• Periodically, it may be necessary to oil the blades. After cleaning, attach
a trimmer head, switch on and oil the blades using a few drops of the
lubricating oil supplied. Only use the lubricating oil supplied with the
appliance as this is specifically formulated for high speed trimmers and
does not evaporate or slow the blades.
• For instructions on how to re-attach the head, please refer to ‘Changing
the Magnetic Heads’ section.
To clean the Detail Foil Shaver attachment
WARNING! Be careful not to push on the foils, they are delicate and can
easily be damaged.
• Rinse the shaver cutter and foil frame under running water or in a sink. Do not
use hot water. Use only warm or cold water.
• After wet cleaning, allow the foil frame and cutters to air-dry before closing the
foil frame and shaver head. Replace shaver head back onto the shaver until
it clicks into place. Wipe the surface of the main unit with a dry towel. Do not
dry the foil area. Let the shaving head air-dry.
• The cutter can also be cleaned with a cleaning brush.
• If the body of the shaver becomes dirty, wipe off with a damp cloth and mild
detergent or soap. NEVER use thinners, other solvents or any harsh cleaners.
