• Hold the Super Stubble XTP against the hair, the teeth of the comb
guide should be pointing upwards and should be flat against the face.
• Move the trimmer upwards through the hair, a little at a time, against
the direction of hair growth. The floating and contouring head will
follow the curves of your face to ensure both accuracy and comfort.
• The super stubble will work most effectively when cutting through
the hair at its own speed – never force through the hair. You may
experience a little resistance when trimming the neck area, where hair
is thicker and grows in many different directions. This is completely
normal.
• Just like shaving, extra time should be given when trimming under
the neck area, as again this is where hairs grow in many different
directions.
• Never switch the trimmer off whilst in the hair.
CLEANING & MAINTENANCE
• Regular cleaning will maintain the high performance of your Super
Stubble XTP.
• Switch off and remove the power cord if connected.
• Detach the comb guide by gently lifting the front of the comb guide
from both sides and flipping it over to the back of the unit and locking
it into position by clicking it securely onto the fastener on the back
of the handle.
• Use the cleaning brush supplied to brush away any hair and debris.
Do not use a sharp object to clean the trimmer blade.
• The blades can be removed to aid cleaning.
• To remove the blades hold the handle of the Super Stubble XTP with
one hand, place your thumb underneath the blades and push the
blades away from the handle.
• Gently blow away any hair trapped beneath the blades.
• The blades can be rinsed under the tap. After rinsing the blades they
may need to be oiled. See ‘Oiling Instructions’ above.
• Before re-attaching the blade to the trimmer, ensure the blades are
dry and moving blade is in the centre. See (Fig. 4).
