BaBylissMEN 7107U, Быстрый старт

Страница: 8 / 12

To Outline using the Trimmer:
• Do not attach a comb guide.
• Hold the trimmer upside down with the blade facing downwards, yet
flat against the skin.
• Move the trimmer gently downwards in small strokes around the
edge of the area you wish to outline.
• Having defined the outline, hold the trimmer with the blades pointing
upwards, yet flat against the skin and move the trimmer upwards
against the direction of hair growth. This will trim the unwanted hair
adjacent to the outline.
CLEANING & MAINTENANCE
To maintain optimum performance, the appliance should be cleaned
after each use:
• Remove the comb guides after use. Rinse the comb guides under
running water and dry thoroughly before storage or use.
• The cutting head of the trimmer is detachable for easy cleaning.
Hold the trimmer pointing away from you with the cutters pointing
upwards. Position your thumb underneath the cutter and push
upwards to take the cutting head off.
• Using the cleaning brush remove any remaining hair from the trimmer
blades.
• To replace the cutting head, align the lug on the rear of the head with
the corresponding groove on the back of the trimmer, and snap down
into place.
• When used regularly the clipper blades will not need to be oiled.
However, if the appliance has not been used for a prolonged period
of time it is advised to oil the blades before use. After cleaning,
switch the appliance on and oil the blades using a few drops of the
lubricating oil supplied. Only use the lubricating oil supplied with the
appliance as this is specifically formulated and does not evaporate
or slow the blades.