BaByliss true smooth 8771BU, Быстрый старт

Страница: 5 / 8

C. Instructions for use
1. Shaving your legs:
• Fix the shaving head on the appliance. Switch on by sliding the
switch upwards.
• Always keep the shaver perpendicular to the surface to be shaved.
• Always work with both hands: stretch the skin with one hand and
move the appliance with the other hand.
• Slowly move the shaver, exerting light pressure. As a
precaution, the operation of the appliance may slow down
substantially, if the machine is pressed too hard against the skin.
2. Shaving sensitive areas:
• To remove hairs from your underarms, move the appliance from
the bottom, in an upwards direction.
• To remove hairs from the bikini line, carefully stretch the skin and
move the appliance from the outside to the inside.
Do not apply too much pressure to avoid causing irritation to the skin.
Do not apply any perfume or deodorant for 24 hours after shaving.
CLEANING AND MAINTENANCE
• Make sure unit is in the OFF position before cleaning your shaver.
• Hold shaver head and lift up from the back, then press the foil frame
release buttons on each side and lift up (the cutter is now in view). BE
CAREFUL NOT TO PUSH ON THE FOILS, THEY ARE DELICATE
AND CAN EASILY BE DAMAGED.
• Rinse the shaver cutter and foil frame under running water or in a
sink. Do not use hot water. Use only warm or cold water.
• After wet cleaning, allow the foil frame and cutters to air-dry before
closing the foil frame and shaver head. Replace shaver head back
onto the shaver until it clicks into place. Wipe the surface of the main
unit with a dry towel. Do not dry the foil area. Let the shaving head
air-dry.
• The cutter can also be cleaned with a cleaning brush.