• Allow the appliance to cool before storing away.
• Place protective cover over the brush head to protect the bristles.
(See ‘Protective Cover’ section for more information).
Heat Settings
There are 2 heat settings plus a cool setting. Use the cool setting on
warm hair to set your style. Slide the switch to the ‘*’ position to select
the cool setting, the ‘I’ position to select the low heat, and the ‘II’
position to select the high heat.
If you have delicate, fine bleached or coloured hair, use the lower heat
setting. For thicker hair, use the higher heat setting.
Rotation Settings
To make the brush head rotate, press and hold the buttons marked
<< and >>. This will make the brush head rotate clockwise and anti-
clockwise.
Protective Cover
After each use, always ensure the protective cover is placed over the
brush head. This protects the bristles from damage. When placing the
protective cover over the brush head, ensure the grooves line up with
the top of the airstyler so it slides easily into place.
Please note:
The diagram on the protective cover demonstrates the
direction it should be places onto the brush head. If placed incorrectly
it may be difficult to remove.
CLEANING & MAINTENANCE
To help keep your appliance in the best possible condition, follow the
steps below:
• Ensure the appliance is switched off, unplugged and cool. To clean
the outside of the appliance, wipe with a damp cloth. Make sure that
no water enters the appliance and it is completely dry before use.
• Do not wrap the lead around the appliance, instead coil the lead
loosely by the side of the appliance.
