Heat Settings
If you have delicate, fine or coloured hair, use the lower heat settings.
For thicker hair, use the higher heat settings.
It is suggested to always complete a test on initial use to ensure the
correct temperature is used on the hair type. Start on the lowest
setting and increase the temperature until desired result is achieved.
Below is a guide of the temperature settings:-
0 = OFF
I = 210°C
II = 230°C
Time Settings
There are 3 timer settings with audio beep indicator. These different
settings will give different curl effects. The longer the time the hair is
held inside the curl chamber, the more defined the curl will be. But
results will also vary according to hair type. Use the following as a
guide.
• Setting 8 (8 seconds = 3 beeps) - for loose waves
• Setting 10 (10 seconds = 4 beeps) - for soft curls
• Setting 12 (12 seconds = 5 beeps) - for more defined curls
Sleep Mode
This appliance has an automatic sleep mode feature. If the appliance
is not used for more than 20 minutes the temperature will automatically
drop down to around 150°C. If you wish to continue using the appliance
after this time, simply close then release the handles and it will return
to the temperature setting you were using it on.
Ionic Technology
Turning on the appliance will automatically activate the ionic technology.
Please note:
The release of the ions from the ports produces a slight
buzzing noise.
