BaByliss 8875U, Инструкция по эксплуатации

Страница: 22 / 32

22
2. Press the ON/OFF button once or several times to select the desired
level of intensity.
> The LED indicators corresponding to the selected level of
intensity will light up.
N.B.:
- Radiance 200 is programmed to intensity level 1 by default.
- To change from level 4 to level 1, for example, press the ON/OFF button
as many times as necessary: the device will switch from level 4 to level 5
and then go down from level 5 to level 4, from level 4 to level 3 and so on,
down to level 1.
3. Place the application surface on the desired area of skin,
establishing complete contact with it
.
> The ON/OFF/READY LED indicator will start flashing.
4. Press the trigger button.
> Radiance 200 will give off an LED pulse.
N.B.: You may feel a slight sensation of warmth and tingling.
5. Remove the application surface from the treated area of skin.
6. Move the application surface to a different treatment area.
> The ON/OFF/READY LED indicator will light up again after
about 2 seconds. Radiance 200 is then ready to emit another
pulse.
B. Glide mode
In Glide mode, the light pulses from your Radiance 200
are released automatically and constantly without any
additional actions being necessary (36 light pulses per
minute, constantly, at level 1).