the handle (fig. 2).
• Switch the i-stubble on by pushing the ‘‘power on’’ button. The LCD
will illuminate and the blades will start to move.
• If you are looking for an ultra close finish, you can use the trimmer
without the comb guide. This will give you an extremely short cut.
IMPORTANT
: please note when using the trimmer without the comb
guide, the cutting length will be below 0.4mm. The length setting
shown on the LCD screen will no longer be relevant when the comb
guide is detached.
i-Stubble Top Tips
• Use on clean, dry hair.
• If possible, when using for the first time, try and grow your facial hair
for a few days before cutting so you can trim down to a level that is
best for you.
• Set the cutting length as required.
• It is always best to start cutting with a longer length first, then trim
again if the length is longer than desired.
Fig. 1
Fig. 2
