BaByliss 7235U, Инструкция по эксплуатации

Страница: 8 / 16

using the Precision Trimmer with jaw line blending
combs:
• Attach one of the three jaw line blending combs (I = 3mm, II
= 5mm and III = 7mm).
• If you require more than one cutting length, start with the
longest length first (7mm).
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer pointing
upwards, yet flat against the skin.
• Move the trimmer upwards and outward through the hair you
wish to blend.
• To blend-in a shorter length use a smaller jaw line comb and
use in the same way as above.
• The trimmer will work most efficiently when cutting through
hair at its own speed.
• For increased trimming performance, press and hold the
turbo button, this is often necessary for thicker areas of
hair.
• Never switch the appliance off whilst in the hair.
To outline using the Precision Trimmer:
• Do not attach a comb guide.
• Hold the trimmer upside down with the blade facing
downwards, yet flat against the skin.
• Move the trimmer gently downwards in small strokes around
the edge of the area you wish to outline.
• Having defined the outline, hold the trimmer with the blades
pointing upwards, yet flat against the skin and move the
trimmer upwards against the direction of hair growth. This
will trim the unwanted hair adjacent to the outline.