INSTRUCTIONS FOR USE
• Ensure hair is dry and combed through to remove any tangles. Divide
the hair into sections ready for styling.
• Press the button marked ‘ ’ to turn the appliance on. The indicator
light will start flashing and the appliance will automatically start
heating up.
• Press the ‘HIGH’ and ‘LOW’ buttons to select a heat setting suitable
for your hair type. The indicator light will flash until the selected
temperature has been reached. Once the temperature has been
reached, the indicator light will remain solid in colour.
• Place a section of hair between the straightening plates, close to
the roots.
• Hold the hair firmly between the straightening plates and slide down
the length of the hair from root to tip in one smooth movement.
• Repeat for each section of hair.
• Allow the hair to cool before styling.
• After use, press the ‘ ’ button to switch off and unplug the appliance.
• Allow the appliance to cool before storing away.
Heat Settings
If you have delicate, fine, bleached or coloured hair, use the lower heat
settings. For thicker hair, use the higher heat settings.
It is suggested to always complete a test on initial use to ensure the
correct temperature is used on the hair type. Start on the lowest
setting and increase the temperature until desired result is achieved.
There are 6 temperature settings to select from; 140°C, 160°C, 180°C,
200°C, 220°C and 235°C.
Auto Shut Off
This appliance has an automatic shut off feature for added safety. If
the appliance is switched on for more than 72 minutes continuously, it
will automatically switch off. To continue using the appliance after this
time, simply press the ‘ ’ button to turn the power on again.
