INSTRUCTIONS FOR USE
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling.
• Press the button marked ‘I’ to switch on and both red and green
lights will flash.
• Rotate the temperature dial to select a heat setting suitable for
your hair type. The green and red lights will flash until the selected
temperature setting has been reached. Once the temperature has
been reached, the green light will remain solid in colour.
• Insert a section of hair between the crimping plates and position over
the area of where the style should start.
• Close the plates firmly together and hold for 5-8 seconds depending
on your hair type.
• Release the appliance from the hair and repeat as desired.
• Allow the hair to cool before styling.
• After use, press the button marked ‘0’ to switch off and unplug the
appliance.
• Allow the appliance to cool before storing away.
Heat Settings
If you have delicate, fine or coloured hair, use the lower heat settings.
For thicker hair, use the higher heat settings. It is suggested to always
complete a test on initial use to ensure the correct temperature is
used on the hair type. Start on the lowest setting and increase the
temperature until desired result is achieved.
Below is a guide of the temperature settings:-
Min – 2 = 120°C – 130°C
2 – 4 = 130°C – 150°C
4 – 6 = 150°C – 170°C
6 – 8 = 170°C – 190°C
8 – Max = 190°C – 210°C