HOW TO USE YOUR CURLING TONG
CAUTION!
Do not place the appliance on any heat sensitive surface whilst
in operation. Use the heat mat provided to protect the work surface whilst
styling your hair.
•
Press and hold the button marked ‘I/0’ to switch the styler on. The
temperature display panel will begin to flash 160°C.
•
The styler will automatically adjust to the 160°C temperature setting
each time it is switched on and this will be displayed on the LCD screen.
IMPORTANT:
Within 4 seconds of turning the styler on, the temperature
setting will automatically lock. You are able to adjust the temperature setting
immediately after switching on the styler, however if the temperature locks,
hold down either the ‘+/-’ buttons for 1-2 seconds to change the temperature.
•
The temperature increases in 5°C increments for specific temperature control
(160°C-210°C).
NOTE:
Always start with a lower temperature setting and increase gradually
if required.
•
The temperature on the display will flash while the styler is heating up to
the selected temperature. You may still change the temperature setting at
this time.
•
When the selected temperature has been reached, the temperature display
will stop flashing.
WARNING!
This appliance reaches up to 210°C, please take care to avoid the
hot surface of the barrel coming in to direct contact with the skin, in particular
the ears, eyes, face and neck.
•
Section dry hair evenly and comb through before styling.
•
Press the lever and place the tong midway up the hair section and spread hair
evenly between the lever and the barrel.
•
Once hair is in place carefully let go of the lever so the hair is held securely
between the lever and the barrel. Gently slide the tong down to the hair
ends.
NOTE:
If using this product on someone else, wrap all the hair section around
the barrel before you let go of the lever.
•
Wind the hair at a slight angle, so the hair wraps around the barrel in a spiral
motion. As you wind the hair around the barrel, ensure the hair is distributed
evenly so the entire section is touching the barrel; try not to overlap the hair.
•
Hold in place for 5-8 seconds depending on the texture and length of the
hair.
•
To remove the tong from the hair, press the lever and pull tong away.
•
Allow the curl to cool before styling it further.
•
Repeat as necessary through the remaining sections. Use the heat protection
mat to place your styler on between each section to protect surfaces.
•
After use, press and hold the ‘I/0’ button for 1-2 seconds to switch your styler
off and unplug.
•
Allow to cool completely before storing away. For extra protection, wrap the
styler in the salon heat wrap.
STYLING ADVICE
Содержание BAB2877U
Страница 1: ...1 3 m m C U R L I N G T O N G T I T A N I U M E X P R E S S I O N...
Страница 8: ...IB 17 332...
Страница 9: ...B A B 2 8 7 7 U...
