INSTRUCTIONS FOR USE
Charging the Appliance
IMPORTANT!
Only use the adaptor supplied with this appliance.
This clipper is so easy to use, but before you do anything you must take
your time to charge the unit for 3 hours before its first use. Maximum
battery capacity will only be reached after 3 charging/discharging
cycles. A 3 hour charge will provide approximately 80 minutes use.
A 30 minute quick charge will provide approximately 30 minutes use.
The red LED light will flash when charging the appliance, and the red
light will stop flashing but remain on when fully charged.
NOTE:
Do not charge the appliance for longer than the recommended
time.
WARNING:
if the charging light suddenly starts to flash rapidly, the
appliance is faulty. If this happens,please stop charging and remove
the adapter from the outlet and contact our customer care center for
further advice.
Cordless Operation
• Insert the adaptor into the base of the appliance, plug into a suitable
mains socket and switch off. The red LED light will flash when the
adaptor is correctly inserted into the appliance and connected to the
mains.
• Once the appliance is fully charged the red LED charging light will
stop flashing but remain on, unplug the adaptor from the mains.
Oiling Instructions
IMPORTANT!
It is highly recommended before each use to oil the blades
with the oil provided. This ensures optimum cutting performance.
For the first use you will need to use the oil supplied with the product,
unscrew the cap and cut off the very end of the plastic tube with a pair
of scissors to release the oil.
7471U IB-17/206.indd 5
5/18/17 10:43 AM
