6-Position Comb Guide For Body Groomer:
• Ensure the appliance is switched off.
• Attach the Body Groomer head.
• Align the larger of the 2 comb guides onto the front of the Body Groomer
head and push down at the rear to lock into place – you will hear a
clicking noise when it’s in position.
• The comb guide will be set to the shortest of the six cutting lengths.
• To adjust the cutting length, push the guide forward to the required
position. The comb guide has 6 length settings, 13, 15, 17, 19, 21 &
23mm.
• To remove the comb, gently lift the guide off the head by lifting the rear
section.
Taper Control
The taper control with 3-position switch enables super fine cut adjustment
for precision trimming.
• The trimmer will be set to it’s shortest cutting length of 0.5mm with the
number 3 visible below the taper control switch.
• To increase the length by 0.5mm to a cutting length of 1mm, slide the
switch down so 2 is visible above the taper control switch.
• To increase the length by a further 0.5mm to a cutting length of 1.5mm,
slide the switch down so both 1 and 2 are visible above the taper control
switch.
NOTE:
The taper control function can only be used with the Precision
Trimmer and Body Groomer heads.
TRIMMING
Precision Trimmer
Using the Precision Trimmer with 6-position comb guide:
• Attach the smaller of the 6-position comb guides and select the required
length (4-18mm).
• If you require more than one cutting length, start with the longest length
first.
• Adjust the taper control for super fine cut adjustment as required.
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer pointing upwards, yet flat
17_7426BU_IB.indd 7
3/24/17 10:33 AM
