• The comb guide will be set to the shortest of the five cutting lengths.
• To adjust the cutting length, push the button and click the guide
forward to the required position. The comb guide has 5 length
settings, 3mm, 6mm, 9mm, 12mm & 15mm.
• To remove the comb, gently lift the guide off the head by lifting the
rear section.
Taper Control
The taper control with 3-position switch (on the rear of the handle)
enables super fine cut adjustment for precision trimming.
• The trimmer will be set to it’s shortest cutting length of 0.5mm with
the number 3 visible below the taper control switch.
• To increase the length by 0.5mm to a cutting length of 1mm, slide the
switch down so 2 is visible above the taper control switch.
• To increase the length by a further 0.5mm to a cutting length of
1.5mm, slide the switch down so both 1 and 2 are visible above the
taper control switch.
NOTE:
The taper control function can only be used with the Precision
Trimmer and Body Groomer heads.
TRIMMING
Precision Trimmer
Using the Precision Trimmer with 5-position
comb guide:
•
Attach the smaller of the 5-position comb
guides and select the required length
(3-15mm).
• If you require more than one cutting length,
start with the longest length first.
•
Adjust the taper control for super fine cut
adjustment as required.
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer pointing upwards, yet
7235U IB-18/189.indd 8
4/20/18 12:48 PM
