baby
leaf
Freedom of baby care
12
6. The starry night projector can be set to permanently ON or VOX (voice
activated) remotely by the PU. Under VOX mode, the starry night projector is
switched on once the microphone 7 detects a sound and goes off a few
seconds after the microphone 7 stops picking up any sound. The starry night
can be projected on the ceiling or wall by making the BU to stand on its
support lever.
7. Press the feeding timer button 4 to initiate the feeding timer countdown
in PU, two beep sound will be heard. The PU icon screen will show flashing
and once the set period has elapsed, an alarm will be heard and show
flashing to remind parents to feed the baby.
8. The temperature sensor inside unit detects the ambient temperature and its
current reading is shown on the icon screen of PU. The normal operating
*KQ Z#@<[/' \ ;<Q Z#*@@[/'" J
range will be shown as - - on the icon screen.
In case there is a sudden big temperature change (e.g. you bring out the unit
from indoor to outdoor during winter time), the sensor may need to take a few
minutes before it can settle to the new environment and show the correct
reading on the icon screen.
Temperature sensor
Ventilation Hole
