front wheels
removal key
front wheels
directional fix
key
brake link
pressing button
Round
Button
Back rest
adjusting
key
square key
Rugby key
D shape key
First push
and press
Pressing
buttons
Installation
Opening the Stroller
Take off the close coupler, grip the handle bar and
pull it up and then back, open the baby stroller,
when the click sound is heard, it is in place.
Assembling and Use of Front Wheel
As shown, insert the axle in to the front wheels
group, once you hear the click sound, installation
is done. When disassembling, press the key and
pull the wheels down.
Swivel and fixed: push the fixed key up to lock
swivel. Opposite way will make the wheels swivel
again.
Assembling and Use of Rear Wheel
Insert the rear wheels in to the rear leg tube. Once you hear the clicking
sound the wheel is fixed.
To remove, lift the key up and pull the wheels off.
Brakes: Push down the brake link to stop and release to move again. Make
sure to secure the brakes on both sides.
Attention:
Once you lock the brakes, push the stroller gently to make sure
the brakes are properly locked.
Assembling and Use of Front Hand rest
Plug the hand rest into the installing holes on
both sides. Once you hear the clicking sound on
both sides the handle is fixed. To remove, press
the key on both sides simultaneously and pull
the handle out.
Assembling and Use of Canopy
As shown in the picture, plug both
ends of the canopy bar in to the bar
mount. To remove, press the round
button indicated in the picture and
pull out.
Pull down or push up the canopy as
per requirement.
Backrest Adjustment
Pull the belt with one hand, as shown in the picture, and at
the same time push the adjusting key upwards or down to
change the angle of the back rest.
Warning
While adjusting the back rest to seating position, the rear
button has to sealed. When you adjust the back rest to flat
position unlock the button. While folding the stroller
always keep the button sealed. Stroller cannot be used in
seating position for children below 6 months.
Leg rest adjustment
As shown in the picture, press the adjusting key in the leg
rest and push it down or up as per requirement.
Leg rest adjustment
As shown in the picture, press the adjusting key in the leg
rest and push it down or up as per requirement.
Rear Canopy
As shown, unzip the rear canopy and roll the fabric to fix it
with the rugby button.
Cushion Pads
As shown in the picture, the base
cushion pad can be removed and
washed. First remove the leg rest,
then release the 2 D button on the
back. Finally release the buttons near
the side hand rest to remove the
cushion pad.
Folding the Stroller
Before folding, lock the wheel brakes,
keep the backrest in the erect
position and fold the canopy. Push
the unlock button on the handle
towards left and press down to fold
the stroller. Please note the front
wheels have to face outside during
folding.
Drag Link
As shown in the picture, once the stroller is folded, pull the drag handle by pushing the
button down and pull like a trolly to move the stroller. Once done press the button and
push the handle down.
5 Point Safety Harness
1. Buckle the four belts as shown in the picture, then insert them in the middle button.
When you hear the clicking sound the harness is fixed.
2. Adjust the shoulder belts and waist belts for perfect fit.
3. Press the button in the middle to release the harness.
Note :
Fasten the harness every time the child is seated in the stroller.
