Install the Battery Music
Insert the toys into the holes of the plate. Open the
battery lid on the music box, put two 1.5V batteries
inside, close the battery lid, tighten with screw.
Install the Toys
Insert the toys into the holes of the toy tray.
Adjust the Panel
As shown in picture, press the left and right side
button on the panel, move the panel front and
rear to adjust the space.
I
nstall Stopper
As shown in picture, insert the stopper into the
plastic holes in chassis and tighten it with 4 pieces
of 4 mm screws. When in use, rotate 90º towards
right and when not in use rotate 90º degree
towards left.
Assembly Instructions
Install Wheels
Install the wheels in the chassis by hands. It
doesn't required any auxiliary tools for fitting.
Unfold
Fix the base and pull the panel up to the
needed height level, make sure the safety
device is in locked state.
Stopper
_
+
+
_
AA 1.5 V
AA 1.5 V
Seat
Musical Toy Tray
Wheels
Stopper
Chassis
Push bar
Height adjustment bar
Panel
Install Seat Cushion
Insert the plastic bolts into the holes around the
panel. Put the plastic stick through the seat cloth's
hole and then tighten with screws.
Know Your Product Well
Adjust the Height
As shown in picture, fix the base then press down
or pull up the panel to the needed height, make
sure the safety device is in the locked state.
Install the Parent Push Bar
Insert the bar into the hole located at
the backside of the walker.
