Babyhome Side Bed Rail, Руководство пользователя, Страница: 6 / 20

6
INSTRUCTIONS FOR ASSEMBLY AND USE
All the components of this product can be
found in the packaging box.
The product comes in the box partly as-
sembled, as shown in illustration 1. To properly
assemble the structure, unfold it and place
it as shown in illustration 1. Attach the upper
aluminium tube to the structure as shown in
close-up 1a / 1b. Adjust the middle and lower
tubes, too, as shown in illustration 1.
Illustration 2 shows the end result of the as-
sembly so far.
Place the structure on the fabric.
Unfold the two sides by pressing the button
(3a) and sliding the bar (3b), as shown in the
illustration, until you hear a click.
Put on the fabric using the built-in zippers
(illustration 4). Close the zipper as shown in
illustration 4a. Repeat this step on the other
size. Finally, join the lower fabric using the
zipper (4b).
It is important to check that the fabric
totally covers the middle and lower tubes. It
is imperative that the fabric be taut, so the
first time you assemble this product it may be
difficult to fit on.
Illustration 5 shows the end result of the as-
sembly so far.
To attach the guardrail to the bed (illustration
6), slide the feet of the guardrail between the
box spring and the mattress and adjust the
belt (6a) by slipping it under the bed and at-
taching both ends together (6a). In this way,
when adjusted properly the guardrail should
be touching the sides of the mattress. There
are two options of assembling the bedrail
depending of bed's size (Look at 6c1 and 6c2).
List and description of components:
Upper aluminium tube
600D polyester fabric
Structure with central tubes partly assembled
Safety harnesses
ES
EN