DE
EN
FR
26
27
PRIME 360
ASSEMBLY STEP
1.
Close the left and right latches of the
buckle (as shown in Figure 1) and en
-
sure that the concave and convex structu
-
res of the left and right latches are closed
3.
Insert the closed latches into the slot
of the buckle.
4.
If you hear „click“ sound, it means
that the buckle has been fastened.
2.
LOOSE THE SEAT BELT:
The seat
belt can be loosened by pressing
the 5-point seat belt adjustment button in
front of the seat. While pressing down the
5-point seat belt adjustment button, hold
the two straps under the shoulder guard
with the other hand and pull them in front
of the child to release the seat belt
2.
Close the left and right latches wit
-
hout leaving a gap. Keep the latches
facing up.
1.
Tighten your baby car seat belt Pull
the shoulder strap up to tighten the
loose part of the leg belt. Then pull the
adjustable belt to tighten the belt. Keep
your seat belt as tight as possible without
causing discomfort. The leg belt should be
as low as possible and should be near the
crotch, not the belly.
A finger space should‘t betweenthe seat
belt and the child.
A loose seat belt is dangerous.fiCheck
that the seat belt adjuster is working
properly each time when you place a
child in a car seat before tightening the
seat belt.
THE USAGE OF BUCKLE
ADJUST THE SAFETY BELT
×
2
1
3
click...
4
5
6
