7
•
Check regularly the walker frame for signs of damage or wear.
•
Clean the plastic parts, including the stoppers, with a damp cloth.
•
Clean the seat with brush or family soap and neutral scour
• Dry the metal parts to prevent the formation of rust.
•
Prolonged exposure to direct sunlight may cause the fabric to fade.
Product Care and Maintenance
Fitting and / or Replacing Batteries
The toy of the walker frame requires 2X"AA" 1.5Volt alkaline
type batteries(not included).
• Batteries must only be fitted by an adult.
•
To fit and/ or replace batteries: loosen the screw on the battery
compartment cover with a suitable screwdriver, press the
tab and remove the battery compartment cover. Then remove
the spent batteries and fit new ones, ensuring that they have
been fitted in the correct polarity, as shown inside the battery
compartment. Replace the battery cover and tighten the screw.
• Always keep batteries and tools out of reach of children.
•
Always remove spent batteries from the toy to avoid the danger
of possible leakage from the battery damaging the product.
•
Always remove the batteries if the toy will not be used for
a long period.
•
Only use alkaline batteries of the same type of equivalent to the
type recommended for the correct function of this product.
•
Never mix new and old batteries, or different types of batteries.
•
Do not burn or dispose of spent batteries into the environment.
Dispose of spent batteries at an appropriate differentiated
collection point.
• Do not short-circuit the battery terminals.
•
Do not attempt to recharge non-rechargeable batteries: they
might explode.
• The use of rechargeable batteries is not recommended and
cannot be used.
