TO INSTALL PORTACOT
3, Raise the centre of the portacot base to a height of 50cm, spread the four
legs of the portacot wide enough for you to grip each of the centre hinges
of the four top rails.
4, Grip the center joints of the short rail, straighten and lift it up until you hear
a clip sound and it is firmly locked. Do the same for rest of three rails.
Note: if any of the rails cannot be firmly locked, repeat step 4 onwards.
5, Push down center of the base until portacot is fully opened and in locked
side facing up.
7, Thread the Velcro tabs attached to the
mattress, through the slits in the base
of the portacot and secure to the underside
Note: Illustration in instructions may vary from actual product.
TO FOLD THE PORTACOT
8, Remove the bassinet (if supplied), and mattress from the portacot.
9, Pull the centre base release and continue lifting the base frame up to a
height of 50-60 cms, before attempting to fold each railing arm.
10, Locate the release button in the centre joint of each railing, press and
lower the railing.
Note: Do not force the railing downward. If button does not release, lift up
the base and repeat step 3.
11, Pull the four legs inward to make into a compact bundle.
12, Wrap the portacot with the mattress (padded side facing inwards). If
supplied, include the bassinette and dismantled poles.
Fasten the velcro straps on mattress and pack complete set in the carrier
bag.
PARTS SUPPLIED: (OPTIONAL PARTS)
1 PORTACOT 1 BASSINETTE FABRIC
1 MATTRESS 2 BASSINETTE M/POLES
1 CARRY BAG 2 BASSINETTE F/POLES
position. Ensure that portacot is stable and all rails are fully locked.
6, You
must
put the mattress into the portacot with the padded
of the portacot to hol
d
the mattress
firmly in place.
1, Remove the portacot from the carrier bag.
2,Release the Velcro straps of mattress that
wraps
the portacot.
Take
out the portacot and put rest of the parts
aside.
