15
Digital Video Baby Monitor
EN
–
To set the air temperature units, press the button Menu/OK C
5
. The main Menu items will
appear on the screen C
3
. Use the buttons C
qg
and C
qh
to select the item "Temperature"
(temperature).
The items "Scale" (unit), "Minimum" (minimum temperature), "Maximum" (maximum temperature)
and "Alert" (warning signal) will appear in the middle of the screen C
3
. Use buttons C
7
and
C
8
to select the item "Scale" (unit). Confi rm the selection by pressing the button Menu/OK
C
5
. The unit "Celsius" and "Fahrenheit" will appear on the screen C
3
. Select your preferred
unit and confi rm the selection by pressing button Menu/Ok C
5
. After a short while, the screen
C
3
will automatically switch to the mode for displaying the video registered by the camera B
3
.
Air temperature will be displayed in the top bar in the measuring unit that you set.
–
To set an alert for a minimum and/or maximum air temperature level, press the button Menu/
OK C
5
. The main Menu items will appear on the screen C
3
. Use the buttons C
qg
and C
qh
to select the item "Temperature" (temperature).
The Submenu items will appear in the middle of the screen C
3
. Use buttons C
7
and C
8
to
select the item "Minimum" (minimum temperature) or "Maximum" (maximum temperature). Confi rm
the selection by pressing the button Menu/OK C
5
. The minimum temperature can be set in the
range from 0 to 17 °C (32 to 63 °F) and the maximum temperature can be set in the range from
18 to 35 °C (64 to 95 °F). Confi rm the minimum or maximum temperature setting by pressing the
button Menu/OK C
5
. If the temperature in the room falls below the set minimum temperature or
otherwise exceeds the maximum temperature, the message "Temperature too low" (temperature
too low) or "Temperature too high" (temperature too high) will appear on the screen C
3
.
–
To set the acoustic alarm that will be triggered when the temperature exceeds the set level,
proceed in the same way as in the preceding paragraph, only with the difference that in the
section "Temperature" (temperature) select the item "Alert" (alert). Confi rm the selection by
pressing the button Menu/OK C
5
. The items "On" (activate) and "Off" (deactivate) will appear
on the screen. Select the item "On" (activate) and confi rm the selection by pressing the button
Menu/OK C
5
. If prior to this you set the minimum and/or the maximum temperature temperature
and it is exceeded, the message "Temperature too low" (temperature too low) or "Temperature
too high" (temperature too high) will appear on the screen C
3
and at the same time the acoustic
alarm will be triggered. To deactivate the alert, select the item "Off" (deactivate).
Note:
In the event that the acoustic alarm is triggered, you may temporarily pause it by pressing any
button on the front control panel or press button C
qs
. The alarm will start again after approximately
3 minutes.
