FIGURE 2
Hardware Included:
FURNITURE TIPPING RESTRAINT INSTRUCTION
Thank you for your purchase
www.rhbabyandchild.com
Wall
Bracket :
2 Pcs.
Screws :
4 Pcs.
Nylon Strap :
2 Pcs.
Page 4 of 4
WARNING:
Young children may be injured by tipping furniture and proper installation of the mounting hardware for this
item is highly recommended. When properly installed, this mounting hardware could provide protection against
the unexpected tipping of this furniture piece.
This product is only a deterrent. It is not a substitute for proper adult supervision.
Anchors :
4 Pcs.
CARE INSTRUCTIONS:
To clean, wipe with a soft dry cloth.
Avoid use of harsh chemicals or abrasive cleaners as they may damage the finishes.
TOOLS NEEDED
Phillips head screwdriver (not included)
FIGURE 1
ASSEMBLY INSTRUCTIONS:
1.
Determine the final position of the furniture piece. Mark location on the
wall approximately 2" below the top of the furniture.
2.
Drill a starter hole into the wall stud. If wall stud is not available, drill a hole
into the wall and insert plastic anchor. Gently tap the anchor until the
flange of the anchor is flush with the wall.
3.
Place the furniture so the Side Panels (A) are in line with the brackets on
the wall.
4.
Lace the supplied nylon straps through the wall bracket & around the side
panel. Bring both ends together and slide the beaded end until it snap locks
into the keyhole slot.
5.
To double lock, return the beaded ends back through keyholes.
6.
Check to make sure the straps are securely laced and locked to the
brackets.
